Action Tool and Manufacturing specializes in  metal stamping dies  & automotive metal stamping Action Tool and Manufacturing specializes in Tool & Die
Action Tool Product & Services - Custom Die Fabrication, Die Repair, Fabricated Assemblies, Metal Stampings Action Tool and Manufacturing's automotive metal stampings & automotive stamping dies Action Tool Equipment List - PUNCH PRESSES, WIRE EDM, INSPECTION EQUIPMENT, MACHINING CENTERS Action Tool and Manufacturing's progressive metal stamping & progressive dies Contact Us - Action Tool & Manufacturing Inc - 5773 Sandy Hollow Road,Rockford, IL 61109 Road Map of Action Tool & Manufacturing Inc for Metal Stamping, Metal Stamping Tools,Metal Stamping Services Action Tool and Manufacturing's offer Abrasive Water Jet Cutting,Drawing Dies, Fine Blanking Dies, Metal Stamping Tools & services
 
EQUIPMENT LIST
PUNCH PRESSES
1 Blanker Bliss 110-Ton
48" x 28" bed w/feeder
1 Blanker Bliss 200-Ton
60" x 48" bed w/feeder (41 SPM)
1 Blanker Danley 500-Ton
97" x 66" bed w/feeder (25 SPM)
1 Blanker Minster 60-Ton
36" x 25" bed w/feeder (200 SPM)
1 Blanker Minster 60- Ton
36" x 25" bed w/feeder (400 SPM)
1 Blanker Minster 75-Ton
42" x 31" bed w/feeder (120 SPM)
1 Blanker Niagara 150-Ton
48" x 30" bed w/feeder (45.90 SPM)
1 Blanker Niagara 300-Ton
72" x 48" bed (15.45 SPM)
1 Blanker Niagara 500-Ton
96" x 54" bed (20.50 SPM)
1 Blanker Niagra 600-Ton
108" x 60" bed w/feeder (60 SPM)
1 Blanker Warco 350-Ton
87" x 48" bed w/feeder (60 SPM)
1 Blanker Warco 500-Ton
96" x 54" bed w/feeder (60 SPM)
1 Secondary Clearing 75-Ton
35" x 25" bed 7" shut height
1 Secondary Clearing 110-Ton
39" x 30" bed 14" shut height
1 Secondary Johnson 45-Ton
26" x 16" bed 9-1/2" shut height
1 Secondary Minster 200-Ton
57" x 33" bed 20" shut height
1 Secondary Niagara 250-Ton OBI
58" x 34" bed 16-1/2" shut height
1 Secondary Verson 150-Ton
34" x 24" bed 17-1/2" shut height
1 Hydraulic St. Lawrence 300-Ton
36" x 60" bed 49" shut height

WIRE EDM
2 ELOX wire EDM series A 13.8" x 19.5" table travel cuts 8"thk
1 FANUC 1C Robocut 20.5 x 14.6 x 11.8" AWF
1 FANUC 1IC Robocut 20.5 x 14.6 12 in. cut
1 FANUC 1IC Robocut 20.5 x 14.6 16in. cut
EDM
1   Ingersoll EDM with Cincinnati solid-state power supply with tapping attachment
INSPECTION EQUIPMENT
1 Mitutoyo PH350 14" profile projector
1 Browne & Sharpe coordinate measuring machine with PC
DMIS software with SPC 29.5" x 25.6" x 19.7" measuring range
MACHINING CENTERS
1 Mitsubishi V65 machine center 49" x 26" work area
1 Mitsubishi M-V60C machine center 40" x 24" work area
1 HAAS VF3 machine center 40" x 20" work area
1 HAAS VFOE machine center 16"x30" work area
1 HAAS VF2 machine center 16"x30" work area
1 HAAS VF2 machine center 16"x30" work area
JIG BORE
1 Pratt & Whitney 2A jig bore with Sony readouts
1 Pratt & Whitney 3B jig bore with Sony readouts 24" x 48"  travel
MILLS
1 Milwaukee vertical mill
3 Lagun vertical mills with digital readouts
7 Bridgeport vertical mills, all with digital readouts
1 Hurco, vertical milling machine with readout
DRILLS
3 20" Clausing drill presses
1 Cincinnati radial drill with 4' arm
1 OOYA radial drill with 5' arm
1 Dimco Milano with 4' arm
1 Carlton with 4' arm
GRINDERS
5 Okamoto 6" x 18" surface grinders
3 Okamoto 12" x 24" surface grinders
1 Reid 6" x 18" surface grinder
1 Mattison 24”x48” surface grinder
LATHES
1 Jet engine lathe 15" x 50" with Trav-A-Dials
1 Lebond Makino lathe 15" with Trav-A-Dials
MISCELLANEOUS
1 Econoline Grit Blaster
1 Sunnen Hone
1 Tig welder
1 2006 Ford Stake Truck 7’x10’ Bed 8-9000 lb. loads
1 Grob vertical band saw
1 DoAll vertical band saw
1 DoAll cut off saw
WATERJET MACHINE
1 2006 “Flow” Dynamic Waterjet Machine Integrated flying bridge model with a cutting table size of 6’ x 12’ and up to 8’ thk The operating pressure can go up to 60,000 PSI and will cut metal, plastic, stone, Glass–almost any material. It is also equipped with active tolerance control allowing Linear positional accuracy of +/-.003 and repeatability of +/-.002 inches

 


 



 



 



 



Abrasive Water Jet Cutting,Drawing Dies, Fine Blanking Dies, Metal Stamping Tools & services - Action Tool in Rockford, Illinois  

Home | Services | Site Map | Contact Us | Flash Intro
Factory Tour | Equipment List | Metal Stamping | Tool Die | Action Difference | Map

© Copyright 2002-2003 Action Tool. Created and maintained by WSI.
This site is optimized for Netscape 4 and Internet Explorer 5 or higher.
Please download an updated version now.